Products

Browse by Product Categories

Browse by Product Categories

Interior Coating
Description:
Nippon Bio-Glaze is a single packed hygienic coating incorporating Polyurethane Dispersion (PUD) technology with excellent anti-bacterial and anti-fungal properties.
Description:
Nippon EvoGloss Enamel is a water-based acrylic gloss enamel with low VOC (Volatile Organic Content) and extremely low odour during application and drying. It is formulated to be an environmentally favorable GREEN product to replace conventional Solvent-based paint for multi-substrate application. Nippon EvoGloss Enamel is specially formulated for use together with our various water-based primers and sealers for various types of substrates.
Description:
An environmentally friendly, anti-bacteria coating for interior use which is washable, covers hairline cracks and provides protection against bacteria - a long lasting coating which promotes better hygiene and health. Ideal for use in homes, schools, hospitals and food preparation areas, Nippon EvoMedico Interior Matt has a special formula which protects the environment from many types of bacteria like MRSA (Methicilline Resistant Staphylococcus Aureus), Escherichia Coli and Staphylococcus Aureus - for inhibition of asthma, flu and diarrhea etc. Ideal for use in homes, schools, hospitals and food preparation areas, Nippon EvoMedico Interior Sheen anti-bacterial paint has a special formula which protects the environment from many types of bacteria like MRSA (Methicilline Resistant Staphylococcus Aureus), Escherichia Coli and Staphylococcus Aureus - for inhibition of asthma, flu and diarrhea etc.
Description:
Nippon Paint MozzieGuard is a special coating with insecticide encapsulated in the polymer for interior use. The active ingredient within the paint enters the Aedes aegypti mosquito when it lands on the painted surface and disrupts the Aedes aegypti mosquitoes nervous system, leading to paralysis and mortality. By covering more surfaces with MozzieGuard, the probability of the Aedes aegypti mosquitoes landing on the paint film becomes higher, which increases the chance of knockdown on contact. MozzieGuard is a safe option, other than NEA Mozzie Wipeout campaign, to fend off the Aedes aegypti mosquitoes that spread dengue and Zika and provide protective benefits to you and your family. Note: MozzieGuard is formulated to be part of the dengue prevention move towards Aedes mosquitoes free community.
Description:
Nippon EvoGloss Enamel is a water-based acrylic gloss enamel with low VOC (Volatile Organic Content) and extremely low odour during application and drying. It is formulated to be an environmentally favorable GREEN product to replace conventional Solvent-based paint for multi-substrate application. Nippon EvoGloss Enamel is specially formulated for use together with our various water-based primers and sealers for various types of substrates.
Description:
FLOOR-PRO 104 AQUA EPOXY PRIMER is a two-pack waterborne modified amine cured epoxy primer. It is designed to penetrate and seal porous substrates such as concrete floor surfaces to provide good adhesion for subsequent topcoat. Acid-treatment should be done prior to application. It is suitable for use as a tie coat between concrete substrate and waterbased topcoat.
Description:
FLOOR-PRO 302 AQUA EPOXY FINISH is a two-pack high performance waterborne modified amine epoxy. It is designed for protection of the internal masonry surfaces such as cement or concrete floor, cement or concrete wall. It is recommended for internal use and in non-immersion services.
Description:
Hi-Pon 40-04 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete, the surface should be acid-treated prior to application. Hi-Pon 40-04 Epoxy Top Coat is also available in non-skid quality.
Description:
Nippon EvoFresh Interior is an environmentally favorable green product formulated with low VOCs (Volatile Organic Content) for interior use and with extremely low odour during application and drying.
Description:
Nippon EvoGreen Exterior is an environmentally favourable green product with low VOCs (Volatile Organic Content) and extremely low odour during application and drying. It is formulated to meet the demand for extended performance under harsh tropical conditions including high level of sunshine, high amount of rainfall and ease of algae and fungus growth.
Description:
Max is an emulsion paint formulated to give that extra resistance to cement alkali which so often causes discolouration and chalking on internal masonry surfaces
Description:
Nippon Bio-Glaze is a single packed hygienic coating incorporating Polyurethane Dispersion (PUD) technology with excellent anti-bacterial and anti-fungal properties.
Description:
Nippon EvoGloss Enamel is a water-based acrylic gloss enamel with low VOC (Volatile Organic Content) and extremely low odour during application and drying. It is formulated to be an environmentally favorable GREEN product to replace conventional Solvent-based paint for multi-substrate application. Nippon EvoGloss Enamel is specially formulated for use together with our various water-based primers and sealers for various types of substrates.
Description:
An environmentally friendly, anti-bacteria coating for interior use which is washable, covers hairline cracks and provides protection against bacteria - a long lasting coating which promotes better hygiene and health. Ideal for use in homes, schools, hospitals and food preparation areas, Nippon EvoMedico Interior Matt has a special formula which protects the environment from many types of bacteria like MRSA (Methicilline Resistant Staphylococcus Aureus), Escherichia Coli and Staphylococcus Aureus - for inhibition of asthma, flu and diarrhea etc. Ideal for use in homes, schools, hospitals and food preparation areas, Nippon EvoMedico Interior Sheen anti-bacterial paint has a special formula which protects the environment from many types of bacteria like MRSA (Methicilline Resistant Staphylococcus Aureus), Escherichia Coli and Staphylococcus Aureus - for inhibition of asthma, flu and diarrhea etc.
Exterior Coating
Description:
Nippon Duflonar high performance polyvinylidene fluoride (PVF2) coating is intended for use on architectural aluminium surfaces when the ultimate protection against weathering is required. 70% of the binder consist of polyvinylidene fluoride, as manufactured under the trade names of Hylar 5000 or Kynar 500 base resins. All Nippon Duflonar coatings meet or exceed all the requirements of AAMA 2605-05 “Voluntary Specification, Performance Requirements and Test Procedures for SUPERIOR PERFORMING ORGANIC COATINGS ON ALUMINIUM EXTRUSIONS AND PANELS” Nippon Duflonar retains its properties for decades and provides protection and long-term economy with inherent advantages over other forms of coatings.
Description:
1K Roll-On Metallic Paint is a water-based metallic paint use on aluminum cladding panels and metal substrate. It is specially formulated for roller application to gives a uniform metallic finish. 2K PU Roll-On Metallic Paint Protective Clear is a two-component aliphatic polyurethane coating. It provides a durable, semi-gloss coating with good abrasion, chemical resistance and with good weathering resistance
Description:
Duflon 4F II Fresh is a high class fluorine, two-pack air-cured fluorocarbon providing excellent gloss and color retention, excellent resistance to water, weather, contaminated gas and chemicals.
Description:
A polyvinylidene fluoride clear overcoat for the Duflonar Baking Fluorocarbon system. It contains 70% Hylar 5000 / Kynar 500 in the binder. As a overcoat for metallic or exotic finishing coat.
Description:
Suisei Si is a water repellent, well penetrating, clear water-based acrylic silicone resin topcoat for concrete protection system. Suisei Si provides a highly durable finish that prolongs the aesthetic retention of the concrete even when it is exposed to harsh climatic environment.
Description:
Suisei Si Primer is a clear water-based penetrative primer designed for use on concrete surfaces. The unique formulation of Suisei Si primer allows deep penetration and shield against moisture penetration to provide long lasting protection.
Description:
Roof-Seal Primer is a ready-to-use primer used to treat porous substrate and to prepare substrates prior to application of waterproofing membrane to enhance adhesion.
Description:
SolaReflect is an elastomeric cool paint system that reflects a large amount of solar energy from the sun. It can reflect more solar energy and reduces the surface temperature by up to 5°C*. This special property can lower heat build-up and subsequently decreases the energy needed for air-conditioning. The SolaReflect technology enables us to offer a wide range of colours for design and decoration, now houses don't have to be white to be cool!
Description:
SolaReflect CoolFloor Midcoat is a 2 component water-based Acrylic Epoxy Hybrid (AEH) coating, designed to enhance the solar reflective properties as well as to create build to accept aggregates for a superior slip and skid resistance finish. It is suited for asphalt, pavement and concrete floor.
Description:
SolaReflect CoolFloor Primer is a two component water-based Acrylic Epoxy Hybrid (AEH) penetrative primer. It is formulated to enhance the adhesion of subsequent mid and topcoats over pavement, asphalt, and concrete surfaces.
Description:
SolaReflect CoolFloor Topcoat is a 2 component water-based Acrylic Epoxy Hybrid (AEH) coating, designed to enhance the appearance and protect the surfaces from heat build-up. It is suited for asphalt, pavement and concrete floor. Unlike conventional epoxy coating, this innovative hybrid technology offers excellent weathering resistance, high hardness, abrasion and chemical resistance. When paired with the SolaReflect Cool Paint system, it is able to improve thermal comfort by reflecting large amount of solar energy effectively, while keeping the surrounding areas cool. By incorporating with carefully selected aggregates, SolaReflect CoolFloor Top Coat is able to provide superior slip and skid resistance, making it safe for foot and light to medium vehicle traffic.
Description:
Solareflect Roof-Seal Waterproofing is a low VOC ready-to-use waterbased acrylic waterproofing membrane. It is made with special blends of polymer, fillers and additives to provide excellent UV resistance while providing long term waterproofing protection for the roof. Besides that, it also has solar reflective properties reflecting large amount of solar energy from the sun. Thus, lowering heat build-up and subsequently keeping the building cool.
Description:
Nippon Solareflect Sealer-Primer White is formulated with special acrylic polymer for excellent alkali and efflorescence resistance properties. It is an interior/exterior sealer, primer and undercoat with good hiding and can enhance the solar reflective performance of Nippon Solareflect.
Description:
SolaReflect Si is a hybrid coating system that offers premium acrylic-silicone coating with SolaReflect technology. The acrylic-silicone system offers superior effectiveness in reducing the water uptake yet able to give high water vapour permeability for the protection of painted substrate. Incorporated with SolaReflect Technology, SolaReflect Si reflects a large amount of solar energy from the sun and able to reduce the surface temperature by up to 5°C*. This special property can lower heat build-up and subsequently decreases the energy needed for air-conditioning. *Temperature reduction varies from colour to colour
Description:
Durasil is a water-based coating system formulated with high premium silicone dispersion that provides excellent UV resistance and durability. Durasil offers low water absorption and high water vapour transmissions which promote the breathability of the coating
Description:
Weatherbond AlgaeGuard combines the benefits of Nippon Paint's best selling exterior paint, Weatherbond, with an enhanced resistance to fungal and algal growth, and superior anti-streak marks properties. This new generation paint boasts all the benefits of its predecessor, including excellent adhesion, long-lasting fade-resistant colours, and extreme durability fit to withstand harsh weather conditions.
Description:
Hydro Reflecto Road Line Paint is a fast dry waterborne road marking paint based on acrylic polymer. It feature fast dry over a broad range of application conditions, excellent durability in terms of retention of glass beads for night visibility and wear properties over asphalt, concrete and old markings. Using together with high refractive index beads, the pavement paint can provide superior retroreflectivity for airfield pavement markings such as runway marking.
Description:
Hydro Runway Paint is a premium fast dry waterborne road marking paint based on acrylic polymer, specially formulated for use on runway, edge lines and taxi lane. It feature fast dry over a broad range of application conditions, with excellent luminance retention and wear properties over asphalt, concrete and old markings.
Description:
It is a tough, fast-drying and weather-durable coating formulated to withstand wear for road and floor marking
Description:
It is a tough, fast-drying and weather-durable coating formulated to withstand wear for road and floor marking
Description:
Hydro Reflecto Road Line Paint is a fast dry waterborne road marking paint based on acrylic polymer. It feature fast dry over a broad range of application conditions, excellent durability in terms of retention of glass beads for night visibility and wear properties over asphalt, concrete and old markings. Using together with high refractive index beads, the pavement paint can provide superior retroreflectivity for airfield pavement markings such as runway marking.
Description:
Hydro Runway Paint is a premium fast dry waterborne road marking paint based on acrylic polymer, specially formulated for use on runway, edge lines and taxi lane. It feature fast dry over a broad range of application conditions, with excellent luminance retention and wear properties over asphalt, concrete and old markings.
Description:
Polymeric WP is a water-based acrylic elastomeric coating with excellent washability that allows easy removal of dirt and stains. It covers hairline cracks and provides good water-resistant thus preventing water penetration into concrete which will corrode the concrete
Description:
It is a tough, fast-drying and weather-durable coating formulated to withstand wear for road and floor marking
Description:
Nippon Super Vinilex 5000 Acrylic Emulsion paint is a top quality emulsion paint recommended for interior and exterior painting.
Description:
A technically advanced paint system to meet the demand for extended performance under harsh tropical conditions. These conditions include high level of sunshine, high amount of rainfall and ease of algae or fungus growth.
Description:
Anti-fungus Solution is used for surface preparation prior to painting to get rid of fungus growth and to kill any remaining fungus spores left on the substrate, so as to prevent the spore from germination
Floor Coating
Description:
FLOOR-PRO 301 XHB GF EPOXY FINISH is a two-component high solid modified cycloaliphatic amine cured glass flake epoxy finish. It can be used on primed floor as a chemical, oil and abrasion resistant finishing coating.
Description:
FLOOR-PRO 302 AQUA EPOXY FINISH is a two-pack high performance waterborne modified amine epoxy. It is designed for protection of the internal masonry surfaces such as cement or concrete floor, cement or concrete wall. It is recommended for internal use and in non-immersion services.
Description:
FLOOR-PRO 303 WB EPOXY HD FINISH is a two-component, water-based epoxy coating with superior water vapour permeability with non out-gassing properties.
Description:
FLOOR-PRO 304 WB EPOXY-PU HYBRID CLEAR is a two-component water-based nano hybrid epoxy-PU clear for use as primer and finishing. It provides excellent adhesion and gives superior durability to most substrate. It also exhibits outstanding wear and chemical resistance properties.
Description:
FLOOR-PRO 305 SF EPOXY FINISH is a two-component, solvent-free high performance epoxy coating. It is developed specifically as chemical and an abrasion resistance topcoat for areas with light and high traffic.
Description:
FLOOR-PRO 307 SF EPOXY FINISH is a three-component solvent-free high grade epoxy coating. It is to be used on primed floor as a chemical, oil and abrasion resistance finishing coating.
Description:
FLOOR-PRO 308 SF EPOXY CLEAR is a two-component, solvent-free low viscosity epoxy clear designed with excellent wetting, leveling and abrasion resistance properties.
Description:
FLOOR-PRO 311 SB EPOXY FINISH is a two-component solvent-based epoxy coating based on high quality epoxy resin and polyamide hardener.
Description:
FLOOR-PRO 312 SF ESD EPOXY FINISH is a two-component, solvent-free 100% solid high performance colored ESD (Anti-Static) epoxy coating. It is a dust free, seamless and glossy finish developed specifically for area subjected to chemicals and abrasion with light or high traffic.
Description:
FLOOR-PRO 313 SF METALLIC EPOXY FINISH is a two-component solvent-free epoxy coating incorporating sparkling and glittering metallic lustres. It is designed to provide luxury decorative high strength finish in various exotic colours and 3D designs.
Description:
FLOOR-PRO 315 SL2 EPOXY FINISH is a three-component, solvent-free self-smoothing epoxy coating in high gloss seamless finish applied at 2mm thickness.
Description:
FLOOR-PRO 316 SL ESD EPOXY FINISH is a self-smoothing ESD (Anti-static) epoxy resin floor finish applied at 1~2mm. It provides a seamless, high mechanical, conductive, good abrasion resistance glossy finishing and available in a wide range of attractive colour.
Description:
FLOOR-PRO 317 SL NOVALAC EPOXY FINISH is a two-component, self-smoothing Novalac epoxy resin floor finish applied at 1~2mm. It provides a dust free, seamless, chemical and abrasion resistance glossy finishing.
Description:
FLOOR-PRO 318 SF EPOXY ANTI-SLIP CLEAR is a two-component, 100% solid anti-slip clear coating formulated with premium grade epoxy coating system with enhanced adhesion on many substrate.
Description:
FLOOR-PRO 319 SF EPOXY-PU HYBRID ANTI-SLIP CLEAR is a two-component, 100% solid rapid cured clear anti-slip epoxy-polyurethane hybrid coating system with improved adhesion on non-porous substrate.
Description:
FLOOR-PRO 323 SF RAPID CURE EPOXY ANTI-SLIP FINISH is a two-component, 100% solid rapid cure anti-slip coating formulated with premium grade epoxy resin.
Description:
FLOOR-PRO 324 SF EPOXY OP TEXTURE is a three-component, solvent-free thixotropic epoxy coating provide orange peel appearance to enhance the slip resistance.
Description:
FLOOR-PRO 326 SF RAPID CURE EPOXY FLAKE FINISH is a two-component, solvent-free 100% solid high grade epoxy topcoat in clear & pigmented finish.
Description:
FLOOR-PRO 327 SF EPOXY TERRAZO is a two-component, solvent-free high performance epoxy terrazzo flooring system incorporating many reflective and exotic fillers such as glass aggregate, pearl chipping and others.
Description:
FLOOR-PRO 328 SF DECORATIVE EPOXY FINISH is a two-component, solvent-free multi-coloured epoxy topcoat formulated with premium special grade epoxy binder.
Description:
FLOOR-PRO 601 LIQUID FLOOR HARDENER is a one-component water-based, deep penetrating solution based on sodium silicate that reacts with free lime within concrete for sealing and dust-proofing friable concrete and masonry surfaces. It acts as a concrete treatment and not a surface coating, and thus will not change the natural colour of the concrete. It can be applied on old and green concrete, but not suitable for natural stone.
Description:
FLOOR-PRO 602 DRY SHAKE FLOOR HARDENER is a one-component non-metallic cementitious dry shake hardener that is sprinkled onto wet and new screed. The product is formulated with selected granolithic concrete material which gives the concrete floor a hard-wearing surface finish.
Description:
FLOOR-PRO 603 COLOURED FLOOR HARDENER is a one-component non-metallic cementitious dry shake coloured hardener that is sprinkled onto wet and new screed. The product is formulated with selected granolithic concrete materials which give the concrete floor a hard-wearing coloured surface finish.
Description:
FLOOR-PRO 604 EMERY BASED FLOOR HARDENER is a one-component ready-to-use dry blend of emery, Portland cement and additives. It is to be applied as a dry shake over freshly floated concrete floor and the aggregates provide good abrasion and protection against impact and chemicals, oil, grease and hydraulics fluids.
Description:
FLOOR-PRO 605 METALLIC BASED FLOOR HARDENER is a one-component ready-to-use dry shake floor hardener. It is formulated with cement and metallic aggregates of mineral origin which has good abrasion resistance, physical and mechanical properties.
Description:
FLOOR-PRO 606 LIQUID FLOOR DENSIFIER is A one-component water based blend of reactive lithium silicate and additives providing enhanced densification and stain resistance ideal for use on both new and old concrete.
Description:
FLOOR-PRO 201 VAPOUR BARRIER is a two-component, water-based epoxy polyamide membrane/barrier coating that has been specifically designed for use in negative water pressure applications.
Description:
FLOOR-PRO 202 SF EPOXY MORTAR is a three-component solvent-free anti-osmosis moisture barrier. It is formulated with epoxy resin filled with special filler applied between 3mm to 10mm thickness.
Description:
FLOOR-PRO 203 SL EPOXY MOISTURE BARRIER is a three-component epoxy modified cementitious self-smoothing moisture barrier.
Description:
FLOOR-PRO 501 RE-SURFACING SCREED is a two-component, pre-packed high performance acrylic polymer modified cement based mortar designed for all types of resurfacing, patching and repairing of concrete surface. The product is designed to have high abrasion resistance and outstanding skid resistance for internal and external walkways and areas subjected to foot traffic.
Description:
FLOOR-PRO 502 RAPID SETTING SCREED is a one-component cementitious screed specially formulated to improve workability and high early ultimate strength for use as floor leveling on uneven horizontal surface before laying top coating.
Description:
FLOOR-PRO 503 SL SCREED - OVERLAYMENT is a two-component rapid setting, polymer-modified, self-smoothing compound consisting of a blend of powders, well-graded aggregates and special additives to achieve good flow property. When mixed, it becomes a flowable compound and is easily applied over concrete slab, screed or tiled floor as an overlay.
Description:
FLOOR-PRO 504 SL SCREED - UNDERLAYMENT is a one-component self-smoothing floor underlayment designed to prepare stable and flat sub-floor for installation of new coverings. It can be applied on absorbent floor substrate such as cement-sand screed, concrete and non absorbent surfaces such as terrazzo, ceramic and quarry tiles at thickness in the range of 3 - 10mm.
Description:
FLOOR-PRO 505 SF SL EPOXY UNDERLAY is a three-component solvent-free 100% solid pigmented self-levelling epoxy compound.
Description:
FLOOR-PRO 401 WB PU MF SCREED is a four-component, self-smoothing polyurethane industrial floor topping with thermal shock resistance properties.
Description:
FLOOR-PRO 402 WB PU HD SCREED is a five-component, thermal shock polyurethane mortar screed applied between 6mm to 12mm thickness. It is ideal to be used as hygienic floor finish for heavy duty wet processing areas.
Description:
FLOOR-PRO 403 SL CONDUCTIVE PU SCREED is a five-component, anti-static, self-smoothing polyurethane floor coating. It provides a seamless finishes with high chemical, mechanical and conductive properties.
Description:
FLOOR-PRO 404 WB 3K PU FINISH is a three-component, high performance water-based aliphatic polyurethane coating designed for use as a durable topcoat to receive foot traffic.
Description:
FLOOR-PRO 405 SF RAPID CURE PU CLEAR is two-component, 100% solid, solvent-free rapid cured polyurethane clear with tough and flexible finishing. It offers superior adhesion on mineral and organic substrates.
Description:
FLOOR-PRO 406 SF RAPID CURE PU PIGMENTED is two-component, 100% solid, solvent-free rapid cured polyurethane topcoat with tough and flexible finishing. It offers superior adhesion on mineral and organic substrates.
Description:
FLOOR-PRO 407 SB PU FINISH is two-component polyurethane coating based on high quality polyester branched polyurethane resin.
Description:
FLOOR-PRO 408 SB PU FINISH ANTI-SLIP is a three-component polyurethane coating based on high quality polyester branched polyurethane resin with anti-skid property.
Description:
FLOOR-PRO 409 SF FLEXIBLE PU FINISH is a two-component, 100% solid, solvent-free pigmented polyurethane formulated with special binder with excellent flexibility and toughness. It provides superior adhesion on mineral and organic substrates.
Description:
FLOOR-PRO 410 WB PU CLEAR is a two-component water-based polyurethane clear coat with good UV resistance.
Description:
FLOOR-PRO 411 WB PU ANTI-SLIP is a two-component, water-based aliphatic polyurethane coating designed to provide good slip resistance and UV protection.
Description:
FLOOR-PRO 412 WB PU MF SATIN is a four-component cementitious polyurethane hybrid system with self-sealing satin sealer to provide excellent abrasion, impact resistance and easy cleaning maintenance.
Description:
FLOOR-PRO 413 WB PU MF MATT is a four-component water-based cementitious polyurethane hybrid system self-sealing matt sealer to provide excellent abrasion and impact resistance.
Description:
FLOOR-PRO 414 WB PU FINISH is a two-component, water-based aliphatic high-grade pigmented polyurethane with good UV resistance.
Description:
FLOOR-PRO 101 WB EPOXY PRIMER OFF WHITE is a two-component water dispersed primer based on epoxy resin and polyamide hardener.
Description:
FLOOR-PRO 102 WB EPOXY PRIMER RED is a two-component water dispersed primer based on epoxy resin and polyamide hardener.
Description:
FLOOR-PRO 103 WB CONDUCTIVE EPOXY PRIMER is a two-component water-based conductive primer based on epoxy resin and polyamide hardener.
Description:
FLOOR-PRO 104 AQUA EPOXY PRIMER is a two-pack waterborne modified amine cured epoxy primer. It is designed to penetrate and seal porous substrates such as concrete floor surfaces to provide good adhesion for subsequent topcoat. Acid-treatment should be done prior to application. It is suitable for use as a tie coat between concrete substrate and waterbased topcoat.
Description:
FLOOR-PRO 105 WATER DISPERSION PRIMER is a one component rapid drying low VOC water-based acrylic primer with excellent penetration and adhesive strength on mineral substrate.
Description:
FLOOR-PRO 106 SF EPOXY PRIMER is a two-component solvent-free low viscosity, 100% solid epoxy primer modified for excellent substrate wetting and penetration.
Description:
FLOOR-PRO 107 SF DAMP-PROOF EPOXY PRIMER is a two-component fast cure, solvent-free pigmented damp proof epoxy primer with medium viscosity and excellent adhesion properties for damp concrete.
Description:
FLOOR-PRO 108 SF UNIVERSAL PRIMER is a three-component, 100% solid solvent-free primer formulated with special grade epoxy binder with superior adhesion on mineral and organic substrate.
Description:
FLOOR-PRO 109 SB EPOXY PRIMER is a two-component solvent-based epoxy primer for concrete surfaces with excellent penetration, fast drying and sealing properties to provide excellent adhesion to concrete.
Description:
FLOOR-PRO 110 SF FLEXIBLE PU PRIMER is a two-component solvent-free 100% solid primer. It is formulated with tough and flexible special grade polyurethane binder with superior adhesion on mineral and organic substrate.
Description:
FLOOR-PRO 111 WB APCC PRIMER is a one-component high grade latex bonding agent for cementitious flooring and mortar.
Description:
FLOOR-PRO 701 SPORT FLOOR BASECOAT is two-component water-based primer cum filler base coat specially designed for sport courts system such as tennis, volleyball and netball courts, walkway, cycling & jogging tracks. It provides a tough durable coating and excellent traction with even bounce properties.
Description:
FLOOR-PRO 702 SPORT FLOOR FINISH is one-component 100% acrylic water-based paint specially designed for sport courts system such as tennis, volleyball and netball courts, walkway, cycling & jogging tracks. It provides a tough durable coating and excellent traction with even bounce properties. It is also recommended as decorative and protective coating for bituminous and concrete surfaces.
Description:
SolaReflect CoolFloor Midcoat is a 2 component water-based Acrylic Epoxy Hybrid (AEH) coating, designed to enhance the solar reflective properties as well as to create build to accept aggregates for a superior slip and skid resistance finish. It is suited for asphalt, pavement and concrete floor.
Description:
SolaReflect CoolFloor Primer is a two component water-based Acrylic Epoxy Hybrid (AEH) penetrative primer. It is formulated to enhance the adhesion of subsequent mid and topcoats over pavement, asphalt, and concrete surfaces.
Description:
SolaReflect CoolFloor Topcoat is a 2 component water-based Acrylic Epoxy Hybrid (AEH) coating, designed to enhance the appearance and protect the surfaces from heat build-up. It is suited for asphalt, pavement and concrete floor. Unlike conventional epoxy coating, this innovative hybrid technology offers excellent weathering resistance, high hardness, abrasion and chemical resistance. When paired with the SolaReflect Cool Paint system, it is able to improve thermal comfort by reflecting large amount of solar energy effectively, while keeping the surrounding areas cool. By incorporating with carefully selected aggregates, SolaReflect CoolFloor Top Coat is able to provide superior slip and skid resistance, making it safe for foot and light to medium vehicle traffic.
Description:
FLOOR-PRO 901 SF EPOXY PUTTY is a two-component solvent-free epoxy resin compound specially formulated for the repair of faulty concrete, curing taken place even at low temperature and high humidity. The cured resin exhibit several outstanding properties, such as high mechanical strength, excellent adhesion to a wide range of substrate, outstanding resistance against water and chemicals, negligible shrinkage, etc.
Description:
FLOOR-PRO 902 SF EPOXY RE-MORTAR is two-component, solvent-free epoxy mortar. It is specially premixed with graded aggregates, epoxy resins and additives to provide a high strength and chemically resistant mortar. The base and hardener are formulated in different colours to provide visual confirmation of adequate and proper mixing on site.
Description:
FLOOR-PRO 903 SB ACRYLIC CONCRETE SEALER is one-component, suitable for use on a wide range of substrate with varying service requirement to give a clear gloss finish, especially on porous substrate to provide good dust-proofing properties.
Description:
FLOOR-PRO 904 SF SCRATCH COAT is a two-component solvent-free epoxy resin filled resurfacing scratch coat.
Description:
FLOOR-PRO 905 SF RAPID CURE EPOXY PUTTY is a two-component, 100% solid solvent-free rapid cure pigmented epoxy putty and scratch coat used to seal imperfections in the substrate.
Description:
FLOOR-PRO 906 SF PIGMENTED THIXOTROPIC EPOXY PUTTY is a two-component 100% solid solvent-free pigmented thixotropic epoxy putty used to seal imperfections in the substrate.
Description:
FLOOR-PRO 907 SF EPOXY BONDING AGENT is a two-component, 100% solid solvent-free epoxy resin compound for bonding cementitious material. It is also ideal for faulty concrete repair which has long pot life and is able to cure at low temperature and high humidity.
Description:
FLOOR-PRO SB 909 STONE CARPET is a two-component, solvent-based decorative clear UV resistant aliphatic high-grade polyurethane binder & top coat for pebbles with water-tight features suitable to be used for outdoor and wet areas to achieve good slip resistance against slips and falls in vulnerable environment such as outdoor walkway, swimming pool deck, toilets, car porches etc.
Description:
FLOOR-PRO 910 WB SCRATCH COAT is a two-component water dispersed ready to use scratch coat used to cover the imperfections on concrete.
Metal Coating
Description:
Hi-Floro 6738 Florocarbon Top Coat is a two component, fast dry, fluorocarbon topcoat, providing excellent film stability, good resistance of contamination, weathering and chemicals, easy application.
Description:
Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
Description:
Hi-Pon 20-03 Epoxy White Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
Description:
Hi-Pon 20-04 STE 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
Description:
Hi-Pon 20-04 STE AL 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with aluminium flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE GF 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with glass flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE IM 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE MIO 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with micaceous iron oxide. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.
Description:
Hi-Pon 50-01 Polyurethane Top Coat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Hi-Pon 50-01 AS Polyurethane Top Coat is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Hi-Pon 50-03 Polyurethane Top Coat is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Nippon Crystalux Alkyd Resin Enamel paint is oil-modified alkyd paint with good durability and good anti-fungus properties
Description:
A single component Phenolic Resin paint with high lustre, excellent durability and anti-corrosive protective property
Description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.
Description:
Nippon Crystalux Alkyd Resin Enamel paint is oil-modified alkyd paint with good durability and good anti-fungus properties
Description:
A single component Phenolic Resin paint with high lustre, excellent durability and anti-corrosive protective property
Description:
Hi-Floro 6738 Florocarbon Top Coat is a two component, fast dry, fluorocarbon topcoat, providing excellent film stability, good resistance of contamination, weathering and chemicals, easy application.
Description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.
Description:
Hi-Pon 50-01 Polyurethane Top Coat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Hi-Pon 50-01 AS Polyurethane Top Coat is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Hi-Pon 50-03 Polyurethane Top Coat is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
Description:
Nippon EvoGloss Enamel is a water-based acrylic gloss enamel with low VOC (Volatile Organic Content) and extremely low odour during application and drying. It is formulated to be an environmentally favorable GREEN product to replace conventional Solvent-based paint for multi-substrate application. Nippon EvoGloss Enamel is specially formulated for use together with our various water-based primers and sealers for various types of substrates.
Primer, Sealer & Undercoat
Description:
Lead and Chromate-free oil modified alkyd primer for iron and steel substrates, conforming to SS: 494 : 2001
Description:
A high opacity and high solid undercoat that will effectively hide the substrate and impart a good film build to the overall coating system. Widely used as an undercoat over timber, metal. PSB Approved Product
Description:
Primer for wooden surfaces. Its excellent sealing property makes it an efficient sealer for woodwork both internal & external
Description:
Nippon Vinilex 2000 Water-based Wall Sealer is formulated with a special acrylic polymer for excellent alkali and efflorescence resistance properties.
Description:
Nippon Classic Top Si is a single component penetrative clear coat consists of solvent-based silicone co-polymer resin. It is specially designed as an impregnate protective topcoat for stone aggregates coatings
Description:
Lead and Chromate-free oil modified alkyd primer for iron and steel substrates, conforming to SS: 494 : 2001
Description:
Primer for wooden surfaces. Its excellent sealing property makes it an efficient sealer for woodwork both internal & external
Description:
Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
Description:
Hi-Pon 20-03 Epoxy White Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
Description:
Hi-Pon 20-04 STE 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
Description:
Hi-Pon 20-04 STE AL 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with aluminium flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE GF 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with glass flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE IM 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Hi-Pon 20-04 STE MIO 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with micaceous iron oxide. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
Description:
Quick Dry QD Undercoat is a high solid quick drying coating with superior opacity that effectively hides the substrate and imparts a good film build to the overall coating system. Widely used as an undercoat over timber and metal. Specially designed undercoat for appropriately primed metals and woods.
Description:
A matt, etching primer that is necessary to ensure good adhesion on all non-ferrous metals. Widely used by both Manufacturing and Heavy Duty Protection concerns
Description:
Nippon Paint Vinilex 5170 Oil-Based Wall Sealer contains a superior resin/binder, effective in preventing the degradation of finishing coats by alkaline surfaces. This wall sealer contains a blend of solvents that enables it to penetrate deeply and gives a firm base for subsequent coats.
Description:
Nippon Watershield W350 is a water-repellent coating formulated with a high quality silane / siloxane mixture.
Description:
Nippon Aqua Primer Sealer Undercoat is a water based one step pre-coat formulated with special acrylic polymer for the following excellent properties:
  • Alkali and efflorescence resistance
  • For interior and exterior application on masonry substrates, timber and metal surfaces.
  • Quick drying
Description:
Nippon Classic Under is a premium grade two component water-based undercoat consisting of silicate based inorganic polymer. This high build undercoat is specially formulated to prepare the substrate for receiving stone texture coatings. Features:
  • Washable; recommended for exterior application
  • Superior adhesion to substrate
  • Outstanding algae and alkaline resisting property
  • Good opacity and sealing property
  • Environmental friendly
  • Available in customized colours for groove creation
Uses: Suitable over new masonry surfaces such as concrete, plaster, brickwork, etc. for subsequent stone textured coatings
Description:
Nippon Paint Expresskote Sealer is formulated with a special styrene acrylic polymer for excellent alkali and efflorescence resistance properties.
Description:
Polymeric Membrane Undercoat is a water-based, high build acrylic elastomeric coating for external masonry surfaces. It is formulated to have excellent weather resistance, to seal and provide for maximum resistance to substrate cracking.
Description:
Nippon Polymeric Undercoat is a 100% acrylic elastomeric coating. It is flexible, covers hairline cracks and offers waterproofing properties to masonry walls.
Description:
Roof-Seal Primer is a ready-to-use primer used to treat porous substrate and to prepare substrates prior to application of waterproofing membrane to enhance adhesion.
Description:
Royal Under is a premium grade two component, high build water-based silicate based inorganic polymer undercoat specially formulated to prepare the substrate for receiving stone texture coatings.
Description:
A high performance and near zero VOC water-based silicone resin primer. It is designed to impregnate masonry substrate through capillary infiltration creating a barrier to water ingress.
Description:
Nippon Solareflect Sealer-Primer White is formulated with special acrylic polymer for excellent alkali and efflorescence resistance properties. It is an interior/exterior sealer, primer and undercoat with good hiding and can enhance the solar reflective performance of Nippon Solareflect.
Description:
Nippon Vinilex 2000 Water-based Wall Sealer is formulated with a special acrylic polymer for excellent alkali and efflorescence resistance properties.
Roof Coating
Description:
Nippon Paint RoofGuard is a high quality and highly durable acrylic-based emulsion that imparts a smooth finish to roof tiles. It contains excellent light-fast and alkali-resistant pigments, and an effective mould-control additive to protect roof tiles. Suitable for application on old and new unglazed roof tiles and other masonry surfaces. Nippon Paint RoofGuard can be used on old and new unglazed roof tiles, cement-fibre sheets, concrete- or cement-fibre pipes. Not recommended for glazed tiles, unless the glazed film has worn off.
Description:
Roof-Seal Primer is a ready-to-use primer used to treat porous substrate and to prepare substrates prior to application of waterproofing membrane to enhance adhesion.
Description:
Solareflect Roof-Seal Waterproofing is a low VOC ready-to-use waterbased acrylic waterproofing membrane. It is made with special blends of polymer, fillers and additives to provide excellent UV resistance while providing long term waterproofing protection for the roof. Besides that, it also has solar reflective properties reflecting large amount of solar energy from the sun. Thus, lowering heat build-up and subsequently keeping the building cool.
Texture Coating
Description:
Nippon Classic Tile is a premium grade, near zero VOC sand-stone like texture coating. It consists of selected natural and synthetic UV resistant coloured stone and aggregates bound by water-based weather resistant 100% acrylic polymer binder suitable for external and internal masonry and other building surfaces
Description:
Nippon Classic Top Si is a single component penetrative clear coat consists of solvent-based silicone co-polymer resin. It is specially designed as an impregnate protective topcoat for stone aggregates coatings
Description:
Nippon Classic Under is a premium grade two component water-based undercoat consisting of silicate based inorganic polymer. This high build undercoat is specially formulated to prepare the substrate for receiving stone texture coatings. Features:
  • Washable; recommended for exterior application
  • Superior adhesion to substrate
  • Outstanding algae and alkaline resisting property
  • Good opacity and sealing property
  • Environmental friendly
  • Available in customized colours for groove creation
Uses: Suitable over new masonry surfaces such as concrete, plaster, brickwork, etc. for subsequent stone textured coatings
Description:
Royal Stone is a premium grade, near zero VOC granite-like texture coating. It consists of selected natural and synthetic UV resistant coloured stones and aggregates bound by water-based weather resistant 100% acrylic polymer binder suitable for external and internal masonry and other building surfaces.
Description:
Nippon Texkote is a special acrylic emulsion giving three dimensional polymeric surface coating by spraying.
Description:
Sand Dune is a premium grade decorative sand texture coating. It consists of fine aggregate bound by water-based weather resistant modified acrylic binder suitable for external and internal masonry and other building surfaces.
Description:
A high performance and near zero VOC water-based silicone resin primer. It is designed to impregnate masonry substrate through capillary infiltration creating a barrier to water ingress.
Wood Coating
Description:
Nippon Crystalux Alkyd Resin Enamel paint is oil-modified alkyd paint with good durability and good anti-fungus properties
Description:
Nippon Crystalux Alkyd Resin Enamel paint is oil-modified alkyd paint with good durability and good anti-fungus properties
Description:
Nippon SolarShield is a durable pigmented wood varnish that provides long-lasting protection against cracking, flaking and peeling. Nippon Solarshield is a premium quality solvent-based transparent wood finish especially formulated to provide long-lasting protection for wood surfaces. It contains a special resin to create a water-resistant and flexible finish that highlights the natural beauty of the wood grain and filters out UV rays. Nippon SolarShield is suitable for all types of new wood surfaces and those previously painted with a transparent wood film such as stair railing, fences, door, frame, furniture and etc. Not suitable for walk-on surfaces.
Description:
Bring the natural beauty of wood grains to life with Nippon Paint Timberlac, an interior decorative wood varnish that's perfect for new and old wooden furniture and door surfaces. Available in several attractive tints, this clear wood varnish adds colour while enhancing the natural grain of the wood, for spectacular results. It's also water resistant and formulated to prevent wood rot and mould growth. With Nippon Paint Timberlac wood varnish, you can now give old furniture a new lease of life.
Description:
WoodGuard is an air-drying type of polyurethane which does not require any addition of hardener. It dries quickly to a glossy, durable finish while enhancing the character of the natural grains of wood. With its enhanced UV protection property and flexibility, the varnish protects timber surfaces from the damaging effects of UV rays, making it ideal for exterior deck and outdoor furniture
Description:
Aqua WoodGuard is a quick drying water-based coating, specially formulated using Advanced Polyurethane Dispersion (PUD) technology. The coating protects timber surfaces from the harmful effects of UV ray and enhances the natural beauty of wood grains with a long lasting finish. It has good durability and flexibility, suitable for decks and outdoor furniture
Description:
Nippon Paint TimberCoat is a low-sheen, water-based acrylic paint that offers excellent durability and good adhesion, and contains light-fast pigments and an effective mould control additive. It is suitable for application on wood substrates such as outdoor furniture, fences, fascias, exposed balconies and etc. Not suitable for walk-on surfaces. It is durable and protects the wood against mould attack.
Ancillaries
Description:
Wallshield Chalky Surface Enhancer is specially formulated with modified acrylic polymer with excellent penetration property to treat & reinforce chalky substrates prior to application of plaster/skim coat and painting.